The Lyell Collection will operate in read-only mode during scheduled maintenance on 28 May. Thank you for your patience.


A new group of engineering materials, called locked sands, has been identified and described. The criteria which differentiate locked sands from dense sands and sandstones are: absence of cohesion, highly quartzose mineralogy, high strength, steeply curved failure envelopes, low porosities, and considerable geological age. Locked sands are also characterized by a lack of interstitial cement, brittle behaviour, residual shear strengths of 30°–35°, and exceptionally large dilation rates at failure. These materials may be common in non-metamorphosed sedimentary strata.
The locked sands were identified during strength testing of Athabasca Oil Sands, a quartzose sand with interstitial bitumen. The St. Peter Sandstone in Minneapolis, Minnesota and the Swan River Sandstone from Manitoba were also found to be locked sands. Tests on artificial dense sands and on redensified material indicate that in situ densities cannot be reproduced in the laboratory. The characteristic behaviour of locked sands is the result of dilation, and the dilation is the result of an interpenetrative fabric identifiable by microscopic examination. This fabric and grain-surface rugosity develop through the action of diagenetic processes of crystal overgrowth and solution.

Get full access to this article

Purchase, subscribe or recommend this article to your librarian.

Information & Authors


Published In

cover image Quarterly Journal of Engineering Geology
Quarterly Journal of Engineering Geology and Hydrogeology
Volume 12Number 2May 1979
Pages: 117 - 131


Published: May 1979


Request permissions for this article.



M. B. Dusseault
Associate Professor of Civil Engineering, University of Alberta, Edmonton, Alberta, Canada.
N. R. Morgenstern
Professor of Civil Engineering, University of Alberta, Edmonton, Alberta, Canada.

Metrics & Citations


Article Usage

Downloaded 8 times


Export citation

Select the format you want to export the citation of this publication.

Citing Literature

  • Assessment of the Brittle–Ductile State of Major Injection and Confining Formations in the Alberta Basin, Energies, 10.3390/en15196877, 15, 19, (6877), (2022).
  • Upscaling Shear Strength of Heterogeneous Oil Sands with Interbedded Shales Using Artificial Neural Network, SPE Journal, 10.2118/208885-PA, (1-17), (2022).
  • undefined, Day 2 Thu, March 17, 2022, 10.2118/208885-MS, (2022).
  • Crown hole development in the sandstone caves of Nottingham, Quarterly Journal of Engineering Geology, 10.1144/GSL.QJEGH.1993.026.004.02, 26, 4, (243-251), (2022).
  • The relative density of geologically aged, British fine and fine-medium sands, Quarterly Journal of Engineering Geology, 10.1144/GSL.QJEG.1989.022.01.04, 22, 1, (49-58), (2022).

View Options

Get Access

Login Options

Restore your content access

Enter your email address to restore your content access:

Note: This functionality works only for purchases done as a guest. If you already have an account, log in to access the content to which you are entitled.

View options


View PDF/ePub







Copy the content Link

Share on social media

Suggested Content

The Lyell Collection uses cookies

The Lyell Collection uses cookies. By continuing to use it you are agreeing to our use of cookies. Find out more.